[Bio] / Sprout / LoadSproutTables.pl Repository:
ViewVC logotype

Diff of /Sprout/LoadSproutTables.pl

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 1.4, Sun Sep 11 17:06:21 2005 UTC revision 1.18, Sun Jan 15 21:32:17 2006 UTC
# Line 2  Line 2 
2    
3  =head1 Load Sprout Tables  =head1 Load Sprout Tables
4    
5  Create the load files for a group of Sprout tables. The parameters are the names of  =head2 Introduction
6  the table groups whose data is to be created. The legal table group names are given below.  
7    The Sprout database reflects a snapshot of the SEED taken at a particular point in
8    time. At some point in the future, it will be possible to add annotations to the
9    Sprout data. All records added to Sprout after the snapshot is taken are
10    specially-marked so that the changes can be copied to the SEED. The SEED remains
11    the live version of the data.
12    
13    The snapshot is produced by reading the SEED data and writing it to sequential
14    files. There is one file per Sprout table, and each such file's name consists of
15    the table name with the suffix C<dtx>. Thus, the file for the C<Genome> table
16    would be named C<Genome.dtx>. These files are used to load the actual Sprout
17    database and to generate Glimpse indices.
18    
19    To load all the Sprout tables and then validate the result, you need to issue three
20    commands.
21    
22        LoadSproutTables -dbLoad -dbCreate "*"
23        TestSproutLoad
24        index_sprout
25    
26    All three commands send output to the console. In addition, C<LoadSproutTables> and
27    C<TestSproutLoad> write tracing information to C<trace.log> in the FIG temporary
28    directory (B<$FIG_Config::Tmp>). At the bottom of the log file will be a complete
29    list of errors. If errors occur in C<LoadSproutTables>, then the data must be corrected
30    and the offending table group reloaded. So, for example, if there are errors in the
31    load of the B<MadeAnnotation> and B<Compound> tables, you would need to run
32    
33        LoadSproutTables -dbLoad Annotation Reaction
34    
35    because B<MadeAnnotation> is in the C<Annotation> group, and B<Compound> is in the
36    C<Reaction> group. A list of the groups is given below.
37    
38    You can omit the C<dbLoad> option to create the load files without
39    loading the database, and you can add a C<trace> option to change the trace level.
40    The command below creates the Genome-related load files with a trace level of 3 and
41    does not load them into the Sprout database.
42    
43        LoadSproutTables -trace=3 Genome
44    
45    C<LoadSproutTables> takes a long time to run, so setting the trace level to 3 helps
46    to give you an idea of the progress.
47    
48    Once the Sprout database is loaded, B<TestSproutLoad> can be used to verify the load
49    against the FIG data. Again, the end of the C<trace.log> file will contain a summary
50    of the errors found. Like C<LoadSproutTables>, C<TestSproutLoad> is a time-consuming
51    script, so you may want to set the trace level to 3 to see visible progress.
52    
53        TestSproutLoad -trace=3
54    
55    Unlike C<LoadSproutTables>, in C<TestSproutLoad>, the individual errors found are
56    mixed in with the trace messages. They are all, however, marked with a trace type
57    of B<Problem>, as shown in the fragment below.
58    
59        11/02/2005 19:15:16 <main>: Processing feature fig|100226.1.peg.7742.
60        11/02/2005 19:15:17 <main>: Processing feature fig|100226.1.peg.7741.
61        11/02/2005 19:15:17 <Problem>: assignment "Short-chain dehydrodenase ...
62        11/02/2005 19:15:17 <Problem>: assignment "putative oxidoreductase." ...
63        11/02/2005 19:15:17 <Problem>: Incorrect assignment for fig|100226.1.peg.7741...
64        11/02/2005 19:15:17 <Problem>: Incorrect number of annotations found in ...
65        11/02/2005 19:15:17 <main>: Processing feature fig|100226.1.peg.7740.
66        11/02/2005 19:15:18 <main>: Processing feature fig|100226.1.peg.7739.
67    
68    The test may reveal that some tables need to be reloaded, or that a software
69    problem has crept into the Sprout.
70    
71    Once all the tables have the correct data, C<index_sprout> can be run to create the
72    Glimpse indexes.
73    
74    =head2 Procedure For Loading Sprout
75    
76    =over 4
77    
78    =item 1
79    
80    Type C<LoadSproutTables -dbLoad -dbCreate "*"> and press ENTER. This will create
81    the C<dtx> files and load them.
82    
83    =item 2
84    
85    Type C<TestSproutLoad 100226.1 83333.1> and press ENTER. This will validate
86    the Sprout database against the SEED data.
87    
88    =item 3
89    
90    If any errors are detected in step (2), it is most likely due to a change in
91    SEED that did not make it to Sprout. Contact Bruce Parrello or Robert Olson
92    to get the code updated properly.
93    
94    =item 4
95    
96    Type C<index_sprout> and press ENTER. This will create the Glimpse indexes
97    for the Sprout data.
98    
99    =back
100    
101    =head2 LoadSproutTables Command
102    
103    C<LoadSproutTables> creates the load files for Sprout tables and optionally loads them.
104    The parameters are the names of the table groups whose data is to be created.
105    The legal table group names are given below.
106    
107  =over 4  =over 4
108    
# Line 24  Line 123 
123  =item Subsystem  =item Subsystem
124    
125  Loads B<Subsystem>, B<Role>, B<SSCell>, B<ContainsFeature>, B<IsGenomeOf>,  Loads B<Subsystem>, B<Role>, B<SSCell>, B<ContainsFeature>, B<IsGenomeOf>,
126  B<IsRoleOf>, B<OccursInSubsystem>, B<ParticipatesIn>, B<HasSSCell>.  B<IsRoleOf>, B<OccursInSubsystem>, B<ParticipatesIn>, B<HasSSCell>,
127    B<Catalyzes>, B<ConsistsOfRoles>, B<RoleSubset>, B<HasRoleSubset>,
128    B<ConsistsOfGenomes>, B<GenomeSubset>, B<HasGenomeSubset>, B<Diagram>,
129    B<RoleOccursIn>.
130    
131  =item Annotation  =item Annotation
132    
133  Loads B<SproutUser>, B<UserAccess>, B<Annotation>, B<IsTargetOfAnnotation>,  Loads B<SproutUser>, B<UserAccess>, B<Annotation>, B<IsTargetOfAnnotation>,
134  B<MadeAnnotation>.  B<MadeAnnotation>.
135    
 =item Diagram  
   
 Loads B<Diagram>, B<RoleOccursIn>.  
   
136  =item Property  =item Property
137    
138  Loads B<Property>, B<HasProperty>.  Loads B<Property>, B<HasProperty>.
# Line 55  Line 153 
153    
154  Loads B<ExternalAliasOrg>, B<ExternalAliasFunc>.  Loads B<ExternalAliasOrg>, B<ExternalAliasFunc>.
155    
156    =item Reaction
157    
158    Loads B<ReactionURL>, B<Compound>, B<CompoundName>,
159    B<CompoundCAS>, B<IsAComponentOf>, B<Reaction>.
160    
161  =item *  =item *
162    
163  Loads all of the above tables.  Loads all of the above tables.
164    
165  =back  =back
166    
167  There are two command-line options, given below. Note that in the command line, spaces  The command-line options are given below.
 inside parameters should be represented by C<\b>.  
168    
169  =over 4  =over 4
170    
# Line 82  Line 184 
184    
185  Desired tracing level. The default is 3.  Desired tracing level. The default is 3.
186    
187    =item dbLoad
188    
189    If TRUE, the database tables will be loaded automatically from the load files created.
190    
191    =item dbCreate
192    
193    If TRUE, the database will be created. If the database exists already, it will be
194    dropped. Use the function with caution.
195    
196    =item loadOnly
197    
198    If TRUE, the database tables will be loaded from existing load files. Load files
199    will not be created. This option is useful if you are setting up a copy of Sprout
200    and have load files already set up from the original version.
201    
202  =back  =back
203    
204  =cut  =cut
# Line 96  Line 213 
213  use File::Path;  use File::Path;
214  use SproutLoad;  use SproutLoad;
215  use Stats;  use Stats;
216    use SFXlate;
217    
218  # Get the command-line parameters and options.  # Get the command-line parameters and options.
219  my ($options, @parameters) = Tracer::ParseCommand({ geneFile => "", subsysFile => "",  my ($options, @parameters) = StandardSetup(['SproutLoad', 'ERDBLoad', 'Stats',
220                                                      trace => 3 },                                              'ERDB', 'Load'],
221                                                { geneFile => ["", "name of the genome list file"],
222                                                  subsysFile => ["", "name of the trusted subsystem file"],
223                                                  dbLoad => [0, "load the database from generated files"],
224                                                  dbCreate => [0, "drop and re-create the database"],
225                                                  loadOnly => [0, "load the database from previously generated files"]
226                                                },
227                                                "<group1> <group2> ...",
228                                                                 @ARGV);                                                                 @ARGV);
229  # Set up tracing.  # If we're doing a load-only, turn on loading.
230  TSetup("$options->{trace} SproutLoad ERDBLoad ERDB Stats Tracer Load", "+>$FIG_Config::temp/trace.log");  if ($options->{loadOnly}) {
231  # Create the sprout loader object.      $options->{dbLoad} = 1
232    }
233    if ($options->{dbCreate}) {
234        # Here we want to drop and re-create the database.
235        my $db = $FIG_Config::sproutDB;
236        if ($FIG_Config::dbms eq "Pg") {
237            my $dbport = $FIG_Config::dbport;
238            my $dbuser = $FIG_Config::dbuser;
239            Trace("Dropping old database (failure is okay).") if T(2);
240            system("dropdb -p $dbport -U $dbuser $db");
241            Trace("Creating new database.") if T(2);
242            &FIG::run("createdb -p $dbport -U $dbuser $db");
243        } elsif ($FIG_Config::dbms eq "mysql") {
244            Trace("Dropping old database (failure is okay).") if T(2);
245            system("mysqladmin -u $FIG_Config::dbuser -p drop $db");
246            &FIG::run("mysqladmin -u $FIG_Config::dbuser -p create $db");
247            Trace("Creating new database.") if T(2);
248        }
249    }
250    # Create the sprout loader object. Note that the Sprout object does not
251    # open the database unless the "dbLoad" option is turned on.
252  my $fig = FIG->new();  my $fig = FIG->new();
253  my $sprout = SFXlate->new_sprout_only();  my $sprout = SFXlate->new_sprout_only(undef, undef, undef, ! $options->{dbLoad});
254  my $spl = SproutLoad->new($sprout, $fig, $options->{geneFile},  my $spl = SproutLoad->new($sprout, $fig, $options->{geneFile}, $options->{subsysFile}, $options);
255                            $options->{subsysFile});  # Insure we have an output directory.
256    FIG::verify_dir($FIG_Config::sproutData);
257  # Process the parameters.  # Process the parameters.
258  for my $group (@parameters) {  for my $group (@parameters) {
259      Trace("Processing load group $group.") if T(2);      Trace("Processing load group $group.") if T(2);
# Line 127  Line 273 
273      if ($group eq 'Property' || $group eq '*') {      if ($group eq 'Property' || $group eq '*') {
274          $spl->LoadPropertyData();          $spl->LoadPropertyData();
275      }      }
     if ($group eq 'Diagram' || $group eq '*') {  
         $spl->LoadDiagramData();  
     }  
276      if ($group eq 'Annotation' || $group eq '*') {      if ($group eq 'Annotation' || $group eq '*') {
277          $spl->LoadAnnotationData();          $spl->LoadAnnotationData();
278      }      }
# Line 145  Line 288 
288      if ($group eq 'External' || $group eq '*') {      if ($group eq 'External' || $group eq '*') {
289          $spl->LoadExternalData();          $spl->LoadExternalData();
290      }      }
291        if ($group eq 'Reaction' || $group eq '*') {
292            $spl->LoadReactionData();
293        }
294    
295  }  }
296  Trace("Load complete.") if T(2);  Trace("Load complete.") if T(2);

Legend:
Removed from v.1.4  
changed lines
  Added in v.1.18

MCS Webmaster
ViewVC Help
Powered by ViewVC 1.0.3